Traction Hobby F150 RC Car Parts 102g Counterweight for Front and Rear Wheels TH01357

Traction Hobby F150 RC Car Parts

Name: 102g Counterweight for Front and Rear Wheels TH01357

How to install the 102g counterweight?

1. It is suitable for models with front independent suspension, including Tank300 series and F150 pickup (for both front and rear wheels).
2. After installing TH01357 on the front wheels, you can further install the TH01358 auxiliary counterweight. TC2512 screws are required for fixation. Usually, TH01358 is only installed on the front wheels.
3. Installing this counterweight requires TF2508 screws.
4. This counterweight is an improved version for front independent suspension, designed to fit the later installation of caliper decorative parts.
5. After installing TH01357, you can install calipers (which need to match 3.0 wheel rims with 3.0 calipers, or 2.6 wheel rims with 2.6 calipers).Once the calipers are installed, TH01358 cannot be installed.
6. It is made of H62 brass with an electrophoretic black finish.

What should be noted?

• It is only suitable for 2.2-inch wheels and not compatible with 3.0-inch wheels.
• Please check the accessory number in the instruction manual before purchasing.

The Configuration of Traction Hobby F150 RC Car

• Motor: RS775 brush motor, customized motor 21000rpm;
• Steering Servo: TH1623HV High Voltage Digital Servo;
• Function Servo: TH1036HV High Voltage Digital Servo;
• ESC: Hao Ying 880 (BEC7.4V), customized high-voltage anti-splash water ESC;

Note: Original parts purchase please refer to the part number, we ship according to the part number.

BACK TO TOP